T5 to T8 adapters - ETL Approved 120V to 277V
T8 to T5 energy saving adaptor to replace existing T8 fluorescent light
1. This energy saving adaptor can be used to directly replace existing T12 or T10 or T8 lamp with electromagnetic ballast to cut down your power bill.
2. You just need to unload the existing starter and T12 or T10 or T8 fluorescent lamp ,then you can directly install this adapter into the G13 socket (for T12 or T10 or T8 lamp) without removing existing electromagnetic ballast which will take a function as a filter and increase the adapter's power factor. This will definitely reduce your retrofit and maintenance costs.
3. It fits the existing lighting fixture well, no flicker, better CRI.
4. It won't disturb the regular work and production during replacement.
5. Rate of energy saving: Over 40% compared with the original power consumption.
6. it’s really a easy and convenient way to achieve energy saving
SPECIFICATION FOR T8 TO T5 BRACKET ADAPTOR
POWER FOR LAMP LENGTH
WITH/WITHOUT REFLECTOR P. F. RATED VOLT. CURRENT POWER CRI USELIFE HOLDER C.T. LUMINOUS FLUX
T8-T5 14W T8 18W 590 ≤36 50mm/26mm ≥0.96 110/220V 0.13/0.065A 14W ≥83 30,000hrs G13 2700K-6500K 1300LM
T8-T5 21W T8 30W 895 ≤36 50mm/26mm ≥0.96 110/220V 0.19/0.095A 21W ≥83 30,000hrs G13 2700K-6500K 1900LM
T8-T5 28W T8 36W 1199 ≤36 50mm/26mm ≥0.96 110/220V 0.23/0.115A 26W ≥83 30,000hrs G13 2700K-6500K 2600LM
T8-T5 35W T8 58W 1499 ≤36 50mm/26mm ≥0.96 110/220V 0.31/0.155A 34W ≥83 30,000hrs G13 2700K-6500K 3200LM
T8 to T5 energy saving adapter:
T8 to T5 energy saving adapter is for updating existing conventional T8, T10 and T12 fluorescent lamp to latest energy saving T5 standard lamp. T5 adapter saves both energy and installation costs. T5 consumes 40%-60% less than the traditional T8, T10 and T12 tubes.
It generates much more lumen than conventional T8, moreover, with the electronic ballast in the adaptor, the replacement will give more than 40% energy saved. And it's fit for existing T8/T10/T12 lighting fixtures. The way of retrofit the existing T8/T10/T12 by using the adapter is the same as to replace a broken tube. All you need to do is to take the old T8/T10/T12 tube off and replace it with the T5 adapter and then take the starter away.
1.More than 40-60% power savings + More environmentally friendly components=green lighting
2.Advanced technology and perfect performance, warm strat, environment friendly PC material which is inflaming retarding, insulated and much more safe than metal material.
3.PF>0.99, THD<10%, wave crest coefficient 1.4, wide voltage(100-277V), constant powder output.
4.Cut off technology, standard current 170mA, imported chip ballast and imported aluminum reflector cover with a glisten index above 85%
5.Automated tube identification, restart when change tube. With perfect self-protect function: short protection, cut-off protection, overheat protection, tube missing or damaged protection, overload protection, end of life protection
6.Easy self installation, no need to rewire anything.
7.Durable and longer life with 4-6 years.
8.Complies with UL, EMC,CE,SAA safety standard
9.Best use for low cost upgrade projects for office buildings, shopping malls, factories, schools, supermarkects, hospitals and public areas that need to reduce energy bill urgently.
T8 to T5 energy saving adapter is for updating existing conventional T8, T10 and T12 fluorescent lamp to latest energy saving T5 standard lamp. Quick and Easy DIY installation. It suitable to energy saving retrofit for office building, underground parking, shopping mall, factory, school, supermarket, hospital, and other public areas where need to reduce the power consumption definitely.